Customizable foam fenders, strong and durable. The outer layer uses military-grade quality polyurea.
Foam Filled Marine Fender Introduction:
EVA foam-filled fender uses polyurethane elastomer as a cushioning medium. Polyurethane foam-filled fender is made of new polymer materials such as polystyrene with high strength, high strength, high elasticity, high adhesion, maximum impermeability, and anti-aging properties. It has a high modulus of elasticity. The ship has a better anti-collision effect when it is close to the ship or dock.
Polyurethane Foam Filled Fender is a floating type compression fender that is highly versatile and suitable for a wide range of applications. It consists of an outer Polyurethane protective layer, a reinforced rubber nylon cord fabric, as well as an internal space that is filled with foam as a medium to absorb collision. Foam fenders outer layer has an extremely low frictional resistance and is highly resistant to wear due to its strength. Impact force is efficiently absorbed by the foam fender, reducing the resultant force acted upon the wharf/vessel at the point of contact. Application wise, this kind of fender can be used for tugs, workboats, pilot boats and is suitable for open sea terminals, gravity ports, especially for large tidal wave docks. Foam fender is also a viable option for Ship-to-Ship (STS) operations.
Features of EVA foam fender:
1. The fender is brightly colored
2. Is an unsinkable design
3. The fender can also be used as a sea buoy
4. Foam fenders are more flexible and cost-saving
5. The fender can maintain its function even if it is pierced, because the foam used is not absorbent
6. The foam fender is easy to install, move and use. Low maintenance.
The foam-filled fender is a high-performance and heavy-duty floating fender system. The foam fender is made of polyurethane elastomer surface layer (or rubber surface layer), nylon reinforcement layer and closed-cell elastic foam. It has high energy absorption and low reaction force.
Structure of foam fender
The foam filled fenders are constructed of three parts each providing an important function in the construction and lifespan of the fender.
The three parts are (1) The closed cell polyurethane foam. (2) Outer nylon cord fabrics. (3) Polyurea spraying coat.
(1) Foam Core
The closed cell polyurethane foam core used inside offers un-sink ability during operation.
(2) Outer Nylon Cord Fabrics
The outer nylon cord fabrics is specifically designed to seal polyurethane foam inside ability during operation.
(3) Polyurea Spraying Coating
Polyurea coating is permanent spray on coatings that protect the surface of fender body. It is more durable than rubber and flexible in all weather conditions: no softening in heat or becoming brittle in cold. Dent, scratch and chemical resistant.
Foam fender parameters:
| Model | D (mm) | L (mm) | Compression 60% | Reference Weight(kg) |
| Counter-force(KN) | Energy Absorption (KJ) |
| Ø 500×1000L | 500 | 1000 | 71 | 8 | 34 |
| Ø 600×1000L | 600 | 1000 | 86 | 12 | 45 |
| Ø 700×1500L | 700 | 1500 | 161 | 27 | 101 |
| Ø 1000×1500L | 1000 | 1500 | 205 | 49 | 206 |
| Ø 1000×2000L | 1000 | 2000 | 274 | 64 | 275 |
| Ø 1200×2000L | 1200 | 2000 | 337 | 93 | 405 |
| Ø 1200×2400L | 1200 | 2400 | 390 | 110 | 475 |
| Ø 1350×2500L | 1350 | 2500 | 463 | 145 | 626 |
| Ø 1500×3000L | 1500 | 3000 | 624 | 216 | 927 |
| Ø 1700×3000L | 1700 | 3000 | 696 | 273 | 1191 |
| Ø 2000×3500L | 2000 | 3500 | 990 | 456 | 1923 |
| Ø 2000×4000L | 2000 | 4000 | 1110 | 505 | 2298 |
| Ø 2200×4500L | 2200 | 4500 | 1396 | 679 | 2992 |
| Ø 2500×4000L | 2500 | 4000 | 1386 | 781 | 3434 |
| Ø 2500×5000L | 2500 | 5000 | 1750 | 985 | 4272 |
| Ø 3000×5000L | 3000 | 5000 | 2050 | 1410 | 6411 |
| Ø 3000×6000L | 3000 | 6000 | 2460 | 1695 | 7293 |
| Ø 3300×6500L | 3300 | 6500 | 2950 | 2245 | 8335 |
| Ø 4500×9000L | 4500 | 9000 | 19650 | 7860 | 21460 |
Advantages of Foam Filled Marine Fender products
1.The fender has good floatability, so that the installation site is not affected by tidal range.
2.Foam fenders are non-pneumatic operation, no scratches and wear, seawater corrosion resistance, strong salt and alkali resistance, and a service life of up to 15 years without regular maintenance.
3.The foam fender has a high safety factor and no explosion hazard.
EVA Polyurethane Foam Filled Floating Fender Application
1.Port STD operation, ship STS,
2.Gravity piers and dolphin piers, especially large piers
3.Marine mooring buoy
4.Protect the fenders of special military fleets or submarines
5.Use with other forms of fenders, such as pneumatic rubber fenders, hydro-pneumatic fenders, etc.
FAQ:
1) Q: What is the minimum order quantity?
Answer: Our company mainly deals with wholesale orders, but if you insist on buying one set, or you only need one set, we are likely to prepare the MOQ for you.
2) Q: Which payment method does your company accept?
A: T/T, Western Union, Money Gram or others.
30% deposit in advance and 70% of the balance upon delivery.
3) Q: What is your packaging and transportation?
Answer: Packing: neutral carton, wooden box or other, depending on the product and quantity. Transportation: air or sea. If it is by sea, you need to inform your port of destination first.
4) Q: Can you give me some discounts?
Answer: We will do our best to help you get the best price and considerate service products at the same time.
Product Tags:
|
|
Customizable Foam Filled Fenders With Military Grade Polyurea Outer Layer Images
|
